Inflatable Rubber Clamp, 6'' Long, with Aluminum Retainer Included
Inflatable Rubber Clamp, 6'' Long, with Aluminum Retainer Included by Pneuma-Cel at Reclaimed Wood Blog. MPN: Q580E-7171-6 Kit. Hurry! Limited time offer. Offer valid only while supplies last. Pneuma-Cel pneumatic bladder clamps are perfectly suited to handle unique and/or difficult clamping applications. Want to stop parts on a conveyor line? Pneuma-Cel bladder clamps have been used in hundreds of conveyor stop/brake applications - from holding plastic detergent bottles prior to filling to stopping intricately machined parts for an assembly operation. Need to hold irregularly shaped and/or delicate objects? Our bladders are made of compliant yet durable reinforced EPDM rubber and can
Product Description & Reviews
Pneuma-Cel pneumatic bladder clamps are perfectly suited to handle unique and/or difficult clamping applications. Want to stop parts on a conveyor line? Pneuma-Cel bladder clamps have been used in hundreds of conveyor stop/brake applications - from holding plastic detergent bottles prior to filling to stopping intricately machined parts for an assembly operation. Need to hold irregularly shaped and/or delicate objects? Our bladders are made of compliant yet durable reinforced EPDM rubber and can conform to irregularly shaped objects. They also can be operated under variable pressures (and gaps) to adjust the force applied on delicate parts.Having trouble with point loads using pneumatic cylinder style clamps? Our pneumatic bladder clamps provide uniform force distribution across the entire contact area. This is particularly helpful in bonding applications where you want ensure a consistent applied force over the entire bond line. Pneuma-Cel bladders are manufactured using high quality EPDM rubber with integrated fabric reinforcement for additional strength. These unique clamps have been tested to 1,000,000 use cycles (under normal conditions) with a standard operating pressure of 35 psi. An air connector is supplied out one end with an 18" long ¼" OD polyurethane hose and 1/8-27 NPT connector. The assembly comes with a pre-drilled low profile anodized retainer and hardware kit, so you can easily attach it to most T-slot framing systems. Once the retainer is installed, all you need to do is slide the bladder into place and you're ready to go.
Features & Highlights
- Unique Clamping Solution
- Provides Uniform Force Across Entire Bladder Surface
- Able to Hold Irregularly Shaped And/Or Delicate Objects
- Excellent Cycle Life and Durability
- Perfect for Use on Conveyor Lines
Pawling Engineered Products
Q580E Fabric Reinforced Inflatable Clamp
Pawling Engineered Products
Have questions about this item (Q580E-7171-6 Kit), or would like to inquire about a custom or bulk order?
If you have any questions about this product by Pneuma-Cel, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: Walfronts1c039uw2g, ean: 0749249538898,
Specification: Model: GH-101A Air Inlet: 1/8'' Clamping force: 50KG Cylinder size: 25*25(Magnetic cylinder) Working pressure: 5-9Kgf/cm²（0.5-0.9mpa） Base fixing screw: M4 * 4pcs Screw distance: 23.8mm/ 0.9in (Left to right) 15.9mm/ 0.6in (Top to bottom) Weight: Approx.356g/ 12.6oz Total length: 174mm / 6.9in Package List: 1 * Pneumatic Clamp Note: Please allow slight error due to manual measurement. Thanks for your understanding.➤METAL MATERIAL: This pneumatic clamp is made of high-stre
mpn: WD-219, ean: 8591230494339,
Specifications: Chuck size: 3/8 (10mm)Category: Straight shank pneumatic drillMaximum drilling diameter: 10 (mm)Drilling force: 10 (mm)Chuck size: 3/8 (inch)No-load speed: 22000 (rpm)Air consumption: 3CFMIntake pipe size: 8*12 (mm)Working pressure: 0.65 (Mpa)Dimensions: 20*90 (mm)Air inlet size: 1/4Average air consumption: 3CFMRecommended tracheal diameter: 8*12mmTool net weight: 0.71 (kg)Scope of application: Powerful drilling, milling, steel brushingPlease confirm the model number before purch
mpn: SN-302, ean: 8591230493875,
Disk diameter: 3 (inch)Applicable polishing wheel: 3 inch rough surface polishing wheelNo-load speed: 2500rpm (rpm)Air consumption: 0.4m3/minAir inlet size: 1/4Recommended tracheal diameter: 8*12Working pressure: 6Use (applicable industry): Furniture factory, painting, wood grindingScope of application: 3 inch rough surface polishing wheelTool length: 180mmDimensions: 180*120mmAverage air consumption: 0.4m3/minTool net weight: 0.8 (kg)Please confirm the model number before purchase.If you have a
mpn: CY-3291D, ean: 8591230494230,
Disk diameter: 5 (inch)Applicable sandpaper: 5in sandpaperNo-load speed: 12000 (rpm)Working pressure: 0.6mpaAverage air consumption: 170 L/MINAir inlet size: 1/4 (inch)Recommended tracheal diameter: 5*8 (mm)Tool net weight: 0.9kg (kg)Length: 120mmHeight: 50mmPower: 200wCompressed air flow: 10~20m/sAir interface thread: 1/4Diameter: 5Exhaust direction: rear rowNoise value: 80dbChuck size: 8mmUse (applicable industry): furniture grinding, car polishing, elevator metal grindingPlease confirm the mo