Hand Threading Taps / Taps - Page 2 - Huge Savings! Save up to 12%


Huge Savings! Up to 12% off on Hand Threading Taps (in Taps) at Reclaimed Wood Blog, Page 2 [149]. Top brands include Dormer, GZTool, ABBOTT, Alfa Tools, Taps - Metric - Plug, Titan Tools, Morse Cutting Tools, Vertex, Union Butterfield, Meda - Superior Import, Century Drill & Tool, Taps - Metric - Bottoming, Drill America, & GAVAN. Hurry! Limited time offers. Offers valid only while supplies last.



Dormer E0615/8NO3 General Purpose Hand Taps, Bright Coating, Bottoming Chamfer Length, TPUNC11, Full Length 3.13/16", Nominal D 5/8, Flute Length 0.9843", Shank Diameter 0.4800"
By Dormer
In Stock
$53.94

mpn: E0615/8NO3, ean: 7320760348697,

4.8 out of 5 stars with 52 reviews
The Dormer MTT E061/MTT E071 high-speed steel hand threading tap has straight flutes, a round shank with a square end, and a gold oxide finish on sizes below 1”, and is used to create right-hand threads in a range of materials, with best performance in cast iron, aluminum, and magnesium. It is available in two different ANSI thread specification standards: UNC (Unified Coarse) or UNF (Unified Fine). The straight flutes are suitable for threading through holes (extending through the workpiece)


GZTool 20mm x 1.0mm Pitch Metric Left Hand Thread Tap M20 x 1 High Speed Steel HSS
By GZTool
In Stock
$35.00

mpn: MGTLHT000403, ean: 0603470998053,

4.8 out of 5 stars with 42 reviews
Brand new and high quality. High speed steel (HSS) provides good wear-resistance and can be used in general purpose applications for both ferrous and non-ferrous materials. Provides a smooth, polished finish on the tool. Model / Size: M20x1.0. Nominal diameter (D): 20mm. Pitch (P): 1.0mm. Thread type: Metric. Material: High Speed Steel HSS. Cutting direction: Left hand. Flute type: Straight flute.M20 x 1.0mm pitch metric left hand thread tap. Thread diameter: 20mm. Pitch size: 1.0mm. Ma


M28 x 1.25 mm Pitch Thread Metric HSS Right Hand Tap [ABBOTT]
By ABBOTT
In Stock
$29.20

mpn: SS85, ean: 0783024455444,

4.1 out of 5 stars with 13 reviews
Metric Right Hand Tap,High-speed steel (M2)!Metric Right Hand Tap. Material: High-speed steel (M2).


Alfa Tools HTS80034 3/8-16 Hss Black Oxide Alfa Hand Tap Set Made In USA,
By Alfa Tools
In Stock
$30.03
$29.79

mpn: HTS80034, ean: 0721511577187,

4.4 out of 5 stars with 42 reviews
Alfa Tools hand taps - BLACK oxide. Super high-speed steel ground thread, right hand. Includes: 3 taps per box, 1 each taper, plug and bottom per size. General purpose taps can be used by hand or under power, in through (open both ends) or Blind holes (closed one end). standard H limits provide adequate class of fit.Alfa USA hand tap 3-piece set - black oxide. 3/8-inch by 16 tap size, 4 flutes. General purpose taps can be used by hand or under power, in through (open both ends) or blind holes (c


22mm x 2.5 High Speed Steel Plug Tap
By Taps - Metric - Plug
In Stock
$30.80

mpn: TAMP-22-2.5,

4.2 out of 5 stars with 20 reviews
High Speed Steel. Plug Style (most common hand tap). Ground Thread.Thread Diameter: 22mm. MM Pitch: 2.5. High Speed Steel. Ground Thread.. Plug Style (most common hand tap)..


Titan Tools 51950 Exo Burr Deburring Tool and External Chamfer Tool
By Titan Tools
In Stock
$39.82

mpn: 51950, ean: 0802090519505,

4.9 out of 5 stars with 18 reviews
Titan Tools 51950 EXO burr external deburrer and chamfering tool is indispensable in repairing damaged threads. With this deburring tool, you can quickly repair damaged threads from 5/16-inch to 7/8-inch (8-22mm). hardened HRC 60 steel blades remove burrs and uneven ridges from threaded rods, pipes, and more. Works on hardened and mild steels, grade 8 fasteners, stainless steel, brass, Copper, aluminum, plastics, wood, etc. 1/4-inch hex shank attaches to your drill quickly. Low speeds make this


Morse Cutting Tools 29848 Decimal Size Chucking Reamer, High-Speed Steel, Bright Finish, Straight Flute, 8 Flutes, 0.623 Size
By Morse Cutting Tools
In Stock
$34.61

mpn: 29848, ean: 0686125298487,

4.1 out of 5 stars with 16 reviews
Morse precision reamers are designed to enlarge the size of a previously formed hole by a small amount but with a high degree of accuracy to leave smooth sides.List No. 1655H. Right Hand Cut. 45 Degree chamfer for reaming most materials.


Vertex 3900-0255 Compact Hand Tapper On Magnetic Base
By Vertex
In Stock
$177.60

mpn: 3900-0255, ean: 0769053101224,

4.4 out of 5 stars with 28 reviews
Vertex compact hand tapper on magnetic base is suitable for large work pieces like machine cases and thin plate tapping jobs. Compact and portable. Maximum stroke is 2. 36''. Mag base is 2. 36 X 2. 36 X 2''. Tap capacity is M3-M12. Powerful 175 lbs. permanent magnet with on/off switch. Drill chuck enables the tap to be easily loaded and removed.Compact and portable. Maximum stroke is 2. 36''. Mag base is 2. 36 x 2. 36 x 2''. Tap capacity is M3-M12. Powerful 175 lbs. permanent magnet with on/off


Union Butterfield 1572(UNC) High-Speed Steel Hand Tap, Screw Thread Insert, Uncoated (Bright) Finish, Round with Square End, Bottoming Chamfer, 4-40 Thread Size
By Union Butterfield
In Stock
$41.04

mpn: 15724-40H2NO3, ean: 0698464021176,

4.8 out of 5 stars with 26 reviews
The Union Butterfield 1572(UNC)/1572(UNF) uncoated, high-speed steel hand threading tap has straight flutes and a round shank with a square end, and is used in copper, brass, bronze, aluminum, and magnesium to tap oversized thread that will receive a helical coil wire screw thread insert (STI). It is available in two different ANSI thread specification standards: UNC (Unified Coarse) or UNF (Unified Fine). The straight flutes are suitable for threading through holes (extending through the workpi


Union Butterfield 1500L(UNF) High-Speed Steel Hand Tap, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, 1/4"-28 Thread Size
By Union Butterfield
In Stock
$30.70

mpn: 1500L1/4X28, ean: 0698464015526,

4.1 out of 5 stars with 31 reviews
The Union Butterfield 1500L(UNC)/1500L(UNS) uncoated, high-speed steel hand threading tap has straight flutes, a plug chamfer, and a round shank with a square end, and is used to create left-hand threads in a range of materials. It is available in two different ANSI thread specification standards: UNC (Unified Coarse) or UNS (Unified Special). The straight flutes are suitable for threading through holes (extending through the workpiece) and blind or bottoming holes (with only one opening). Left


Morse Cutting Tools 29645 Decimal Size Chucking Reamer, High-Speed Steel, Bright Finish, Straight Flute, 6 Flutes, 0.406" Size
By Morse Cutting Tools
In Stock
$32.47

mpn: 29645, ean: 0686125296452,

4.6 out of 5 stars with 14 reviews
Morse precision reamers are designed to enlarge the size of a previously formed hole by a small amount but with a high degree of accuracy to leave smooth sides.List No. 1655H. Right Hand Cut. 45 Degree chamfer for reaming most materials.


1-1/4" - 8 HSS Bottoming Hand Tap
By Meda - Superior Import
In Stock
$52.25

mpn: 8080082,

4.9 out of 5 stars with 56 reviews
High Speed Steel, Ground Thread, Bottoming (1 - 2 Thread Chamfer. Designed for threading near the bottom of blind holes).High Speed Steel. Ground Thread. Hand Tap. Bottoming: 1-2 Thread Chamfer for threading near the bottom of blind holes.


27mm x 3 High Speed Steel Plug Tap
By Taps - Metric - Plug
In Stock
$50.90

mpn: TAMP-27-3,

4.2 out of 5 stars with 55 reviews
High Speed Steel. Plug Style (most common hand tap). Ground Thread.Thread Diameter: 27mm. MM Pitch: 3. High Speed Steel. Ground Thread.. Plug Style (most common hand tap)..


Century Drill & Tool 97206 High Carbon Steel National Pipe Tap, 1-11 1/2 NPT
By Century Drill & Tool
In Stock
$38.88
$34.38
You Save: 12%

mpn: 97206, ean: 0081838972066,

4.3 out of 5 stars with 47 reviews
Century's national pipe thread taps offer precision cut threads, accurately formed for consistent, exact threading. Heat treated and tempered for file hard threads and longer useful life. Designed for hand cutting applications.Heat treated and tempered for file hard threads, and longer, useful life. Designed for hand cutting applications. Will not fit standard tap wrench sizes. NPT stands for national pipe thread. Use 15/16'' drill bit for best results.


24 mm x 1.5 High Speed Steel Bottoming Tap
By Taps - Metric - Bottoming
In Stock
$35.90

mpn: TAMB-24-1.5,

4.5 out of 5 stars with 37 reviews
High Speed Steel. Bottoming Style (Bottoming Taps have 1-2 threads of lead, for threading close to the bottom of a blind hole.) Ground Thread. Please note that not all bottoming taps are flattened at the end. Some manufacturers leave a point that you may have to grind off if going very close to the bottom of a hole.Thread Diameter: 24mm. MM Pitch: 1.5. Bottoming Taps have 1-2 threads of lead, for threading close to the bottom of a blind hole.. High Speed Steel. Ground Thread.. Please note that n


Alfa Tools HSMTT271028 10mm x 1.25mm High-Speed Steel Metric Tap Taper (5 Pack)
By Alfa Tools
In Stock
$42.43

mpn: HSMTT271028, ean: 0721511345489,

4.1 out of 5 stars with 51 reviews
General purpose taps can be used by hand or under power, in through (open both ends) or blind holes (closed one end). Suitable for tapping most materials. Standard “H” limits provide adequate class of fit. Taper taps (7 to 10 threads) Longest chamfer insures easier starting.Eco Pro Metric Hand Tap. 10-millimeter by 1.25 Tap Size. Taper Style, 4 Flutes, High Speed Steel. Standard ''H'' limits provide adequate class of fit. Quantity: 5 per Pack.


Drill America 1-3/16"-16 High Speed Steel Plug Hand Tap, DWT Series
By Drill America
In Stock
$66.16
$59.16
You Save: 11%

mpn: DWTST1-3/16-16P, ean: 0887861091213,

4.2 out of 5 stars with 26 reviews
Drill America DWT Series High Speed Steel hand taps are the most versatile taps for hand use, or for tapping under power. Hand taps are popular for use in general machine tapping or CNC tapping. For re-threading and making new threads. High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole. A tap set contains 1 taper, 1 plug and 1 bottoming tap


1-11/16" - 12 HSS Plug Hand Tap
By Meda - Superior Import
In Stock
$98.45

mpn: 8144121,

4.9 out of 5 stars with 45 reviews
High Speed Steel, Ground Thread, Plug (3 - 5 Thread Chamfer. Most versatile choice for through or blind holes).High Speed Steel. Ground Thread. Hand Tap. Plug: 3-5 Thread Chamfer; most popular choice for thru or blind holes.


M25 x 1.5 Metric HSS Right Hand Thread Tap
By GAVAN
In Stock
$46.00

mpn: TM-25X1D5, ean: 0616469089120,

4.3 out of 5 stars with 17 reviews
Brand new metric HSS right hand thread tap M25 x 1.5mm.Metric M25 x 1.5mm right hand thread Tap. Diameter :25mm. Pitch size: 1.5mm.


GZTool 7/18-18 UNS Left Hand Thread Tap 7/8'' - 18 TPI High Speed Steel HSS
By GZTool
In Stock
$35.00

mpn: MGTLHT000785, ean: 0603470997902,

4.3 out of 5 stars with 42 reviews
Brand new and high quality. High speed steel (HSS) provides good wear-resistance and can be used in general purpose applications for both ferrous and non-ferrous materials. Provides a smooth, polished finish on the tool. Model / Size: 7/8'' - 18. Nominal diameter (D): 7/8''. Threads per inch (TPI): 18. Material: HSS. Cutting direction: Left hand. Flute type: Straight flute.7/8'' - 18 TPI UNS left hand thread tap. Thread diameter: 7/8''. Threads per inch (TPI): 18. Material type: high spe



Viewing Page 2 of 3

Browse Our Catalog




Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - reclaimedwoodblog.com. All Rights Reserved.